MFC
Exascale flow solver
Loading...
Searching...
No Matches
m_patch_geometries.fpp.f90
Go to the documentation of this file.
1# 1 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp"
2!>
3!! @file
4!! @brief Contains module m_patch_geometries
5
6# 1 "/home/runner/work/MFC/MFC/src/common/include/macros.fpp" 1
7# 1 "/home/runner/work/MFC/MFC/src/common/include/parallel_macros.fpp" 1
8# 1 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp" 1
9# 2 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
10# 3 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
11# 4 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
12# 5 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
13# 6 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
14
15# 8 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
16# 9 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
17# 10 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
18
19# 12 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
20# 1 "/home/runner/work/MFC/MFC/src/common/include/defaults/thermochem.fpp" 1
21! Default for Fypp runs outside the toolchain (e.g. documentation). Searched last, so the
22! build/include/<target>/thermochem.fpp the toolchain writes from m_thermochem takes precedence.
23# 4 "/home/runner/work/MFC/MFC/src/common/include/defaults/thermochem.fpp"
24# 5 "/home/runner/work/MFC/MFC/src/common/include/defaults/thermochem.fpp"
25# 13 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp" 2
26
27# 16 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
28# 17 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
29
30# 24 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
31
32# 53 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
33
34# 65 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
35
36# 75 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
37
38# 105 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
39
40# 117 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
41
42# 127 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
43
44# 174 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
45! New line at end of file is required for FYPP
46# 2 "/home/runner/work/MFC/MFC/src/common/include/parallel_macros.fpp" 2
47# 1 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp" 1
48# 1 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp" 1
49# 2 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
50# 3 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
51# 4 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
52# 5 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
53# 6 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
54
55# 8 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
56# 9 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
57# 10 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
58
59# 12 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
60# 1 "/home/runner/work/MFC/MFC/src/common/include/defaults/thermochem.fpp" 1
61! Default for Fypp runs outside the toolchain (e.g. documentation). Searched last, so the
62! build/include/<target>/thermochem.fpp the toolchain writes from m_thermochem takes precedence.
63# 4 "/home/runner/work/MFC/MFC/src/common/include/defaults/thermochem.fpp"
64# 5 "/home/runner/work/MFC/MFC/src/common/include/defaults/thermochem.fpp"
65# 13 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp" 2
66
67# 16 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
68# 17 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
69
70# 24 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
71
72# 53 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
73
74# 65 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
75
76# 75 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
77
78# 105 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
79
80# 117 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
81
82# 127 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
83
84# 174 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
85! New line at end of file is required for FYPP
86# 2 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp" 2
87
88# 4 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp"
89# 5 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp"
90# 6 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp"
91# 7 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp"
92# 8 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp"
93
94# 20 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp"
95
96# 43 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp"
97
98# 48 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp"
99
100# 53 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp"
101
102# 58 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp"
103
104# 63 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp"
105
106# 68 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp"
107
108# 81 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp"
109
110# 95 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp"
111
112# 100 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp"
113
114# 105 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp"
115
116# 110 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp"
117
118# 115 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp"
119
120# 120 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp"
121
122# 125 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp"
123
124# 130 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp"
125
126# 135 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp"
127
128# 165 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp"
129
130# 219 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp"
131
132# 233 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp"
133
134# 258 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp"
135
136# 269 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp"
137
138# 271 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp"
139# 282 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp"
140
141# 332 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp"
142
143# 342 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp"
144
145# 352 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp"
146
147# 361 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp"
148
149# 378 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp"
150
151# 388 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp"
152
153# 395 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp"
154
155# 401 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp"
156
157# 407 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp"
158
159# 413 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp"
160
161# 419 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp"
162
163# 425 "/home/runner/work/MFC/MFC/src/common/include/omp_macros.fpp"
164! New line at end of file is required for FYPP
165# 3 "/home/runner/work/MFC/MFC/src/common/include/parallel_macros.fpp" 2
166# 1 "/home/runner/work/MFC/MFC/src/common/include/acc_macros.fpp" 1
167# 1 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp" 1
168# 2 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
169# 3 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
170# 4 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
171# 5 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
172# 6 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
173
174# 8 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
175# 9 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
176# 10 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
177
178# 12 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
179# 1 "/home/runner/work/MFC/MFC/src/common/include/defaults/thermochem.fpp" 1
180! Default for Fypp runs outside the toolchain (e.g. documentation). Searched last, so the
181! build/include/<target>/thermochem.fpp the toolchain writes from m_thermochem takes precedence.
182# 4 "/home/runner/work/MFC/MFC/src/common/include/defaults/thermochem.fpp"
183# 5 "/home/runner/work/MFC/MFC/src/common/include/defaults/thermochem.fpp"
184# 13 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp" 2
185
186# 16 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
187# 17 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
188
189# 24 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
190
191# 53 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
192
193# 65 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
194
195# 75 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
196
197# 105 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
198
199# 117 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
200
201# 127 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
202
203# 174 "/home/runner/work/MFC/MFC/src/common/include/shared_parallel_macros.fpp"
204! New line at end of file is required for FYPP
205# 2 "/home/runner/work/MFC/MFC/src/common/include/acc_macros.fpp" 2
206
207# 7 "/home/runner/work/MFC/MFC/src/common/include/acc_macros.fpp"
208
209# 17 "/home/runner/work/MFC/MFC/src/common/include/acc_macros.fpp"
210
211# 22 "/home/runner/work/MFC/MFC/src/common/include/acc_macros.fpp"
212
213# 27 "/home/runner/work/MFC/MFC/src/common/include/acc_macros.fpp"
214
215# 32 "/home/runner/work/MFC/MFC/src/common/include/acc_macros.fpp"
216
217# 37 "/home/runner/work/MFC/MFC/src/common/include/acc_macros.fpp"
218
219# 42 "/home/runner/work/MFC/MFC/src/common/include/acc_macros.fpp"
220
221# 47 "/home/runner/work/MFC/MFC/src/common/include/acc_macros.fpp"
222
223# 52 "/home/runner/work/MFC/MFC/src/common/include/acc_macros.fpp"
224
225# 57 "/home/runner/work/MFC/MFC/src/common/include/acc_macros.fpp"
226
227# 62 "/home/runner/work/MFC/MFC/src/common/include/acc_macros.fpp"
228
229# 73 "/home/runner/work/MFC/MFC/src/common/include/acc_macros.fpp"
230
231# 78 "/home/runner/work/MFC/MFC/src/common/include/acc_macros.fpp"
232
233# 83 "/home/runner/work/MFC/MFC/src/common/include/acc_macros.fpp"
234
235# 88 "/home/runner/work/MFC/MFC/src/common/include/acc_macros.fpp"
236
237# 103 "/home/runner/work/MFC/MFC/src/common/include/acc_macros.fpp"
238
239# 131 "/home/runner/work/MFC/MFC/src/common/include/acc_macros.fpp"
240
241# 160 "/home/runner/work/MFC/MFC/src/common/include/acc_macros.fpp"
242
243# 175 "/home/runner/work/MFC/MFC/src/common/include/acc_macros.fpp"
244
245# 193 "/home/runner/work/MFC/MFC/src/common/include/acc_macros.fpp"
246
247# 215 "/home/runner/work/MFC/MFC/src/common/include/acc_macros.fpp"
248
249# 244 "/home/runner/work/MFC/MFC/src/common/include/acc_macros.fpp"
250
251# 259 "/home/runner/work/MFC/MFC/src/common/include/acc_macros.fpp"
252
253# 269 "/home/runner/work/MFC/MFC/src/common/include/acc_macros.fpp"
254
255# 278 "/home/runner/work/MFC/MFC/src/common/include/acc_macros.fpp"
256
257# 294 "/home/runner/work/MFC/MFC/src/common/include/acc_macros.fpp"
258
259# 304 "/home/runner/work/MFC/MFC/src/common/include/acc_macros.fpp"
260
261# 311 "/home/runner/work/MFC/MFC/src/common/include/acc_macros.fpp"
262! New line at end of file is required for FYPP
263# 4 "/home/runner/work/MFC/MFC/src/common/include/parallel_macros.fpp" 2
264
265! GPU parallel region (scalar reductions, maxval/minval)
266# 23 "/home/runner/work/MFC/MFC/src/common/include/parallel_macros.fpp"
267
268! GPU parallel loop over threads (most common GPU macro)
269# 43 "/home/runner/work/MFC/MFC/src/common/include/parallel_macros.fpp"
270
271! Required closing for GPU_PARALLEL_LOOP
272# 55 "/home/runner/work/MFC/MFC/src/common/include/parallel_macros.fpp"
273
274! Mark routine for device compilation
275# 112 "/home/runner/work/MFC/MFC/src/common/include/parallel_macros.fpp"
276
277! Declare device-resident data
278# 130 "/home/runner/work/MFC/MFC/src/common/include/parallel_macros.fpp"
279
280! Inner loop within a GPU parallel region
281# 145 "/home/runner/work/MFC/MFC/src/common/include/parallel_macros.fpp"
282
283! Scoped GPU data region
284# 164 "/home/runner/work/MFC/MFC/src/common/include/parallel_macros.fpp"
285
286! Host code with device pointers (for MPI with GPU buffers)
287# 193 "/home/runner/work/MFC/MFC/src/common/include/parallel_macros.fpp"
288
289! Allocate device memory (unscoped)
290# 207 "/home/runner/work/MFC/MFC/src/common/include/parallel_macros.fpp"
291
292! Free device memory
293# 219 "/home/runner/work/MFC/MFC/src/common/include/parallel_macros.fpp"
294
295! Atomic operation on device
296# 231 "/home/runner/work/MFC/MFC/src/common/include/parallel_macros.fpp"
297
298! End atomic capture block
299# 242 "/home/runner/work/MFC/MFC/src/common/include/parallel_macros.fpp"
300
301! Copy data between host and device
302# 254 "/home/runner/work/MFC/MFC/src/common/include/parallel_macros.fpp"
303
304! Synchronization barrier
305# 266 "/home/runner/work/MFC/MFC/src/common/include/parallel_macros.fpp"
306
307! Import GPU library module (openacc or omp_lib)
308# 275 "/home/runner/work/MFC/MFC/src/common/include/parallel_macros.fpp"
309
310! Emit code only for AMD compiler
311# 282 "/home/runner/work/MFC/MFC/src/common/include/parallel_macros.fpp"
312
313! Emit code for non-Cray compilers
314# 289 "/home/runner/work/MFC/MFC/src/common/include/parallel_macros.fpp"
315
316! Emit code only for Cray compiler
317# 296 "/home/runner/work/MFC/MFC/src/common/include/parallel_macros.fpp"
318
319! Emit code for non-NVIDIA compilers
320# 303 "/home/runner/work/MFC/MFC/src/common/include/parallel_macros.fpp"
321
322# 305 "/home/runner/work/MFC/MFC/src/common/include/parallel_macros.fpp"
323# 306 "/home/runner/work/MFC/MFC/src/common/include/parallel_macros.fpp"
324! New line at end of file is required for FYPP
325# 2 "/home/runner/work/MFC/MFC/src/common/include/macros.fpp" 2
326
327# 14 "/home/runner/work/MFC/MFC/src/common/include/macros.fpp"
328
329! Caution: This macro requires the use of a binding script to set CUDA_VISIBLE_DEVICES, such that we have one GPU device per MPI
330! rank. That's because for both cudaMemAdvise (preferred location) and cudaMemPrefetchAsync we use location = device_id = 0. For an
331! example see misc/nvidia_uvm/bind.sh.
332# 52 "/home/runner/work/MFC/MFC/src/common/include/macros.fpp"
333
334! Allocate and create GPU device memory
335# 72 "/home/runner/work/MFC/MFC/src/common/include/macros.fpp"
336
337! Free GPU device memory and deallocate
338# 80 "/home/runner/work/MFC/MFC/src/common/include/macros.fpp"
339
340! Cray-specific GPU pointer setup for vector fields
341# 104 "/home/runner/work/MFC/MFC/src/common/include/macros.fpp"
342
343! Cray-specific GPU pointer setup for scalar fields
344# 120 "/home/runner/work/MFC/MFC/src/common/include/macros.fpp"
345
346! Cray-specific GPU pointer setup for acoustic source spatials
347# 145 "/home/runner/work/MFC/MFC/src/common/include/macros.fpp"
348
349# 151 "/home/runner/work/MFC/MFC/src/common/include/macros.fpp"
350
351# 158 "/home/runner/work/MFC/MFC/src/common/include/macros.fpp"
352! New line at end of file is required for FYPP
353# 6 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp" 2
354
355!> @brief Contains helper functions specific to various patch gemoetries for determining if a grid cell lies inside of or outside of
356!! a patch geometry
357module m_patch_geometries
358
359 use m_derived_types
360 use m_global_parameters
361 use m_variables_conversion
362 use m_helper
363 use m_helper_basic
364 use m_constants
365 use m_model
366
367 implicit none
368
369 public :: f_is_inside_sphere, f_is_inside_cylinder, f_is_inside_cuboid, f_is_inside_airfoil, f_is_inside_ellipse
370
371contains
372
373 !> Check if the x, y, and z coordinates would be located inside a sphere with the patch_id's radius
374 function f_is_inside_sphere(x, y, z, radius) result(is_inside)
375
376
377# 28 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp"
378#if MFC_OpenACC
379# 28 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp"
380!$acc routine seq
381# 28 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp"
382#elif MFC_OpenMP
383# 28 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp"
384
385# 28 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp"
386
387# 28 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp"
388!$omp declare target device_type(any)
389# 28 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp"
390#endif
391# 29 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp"
392
393 real(wp), intent(in) :: radius, x, y, z
394 logical :: is_inside
395
396 is_inside = x**2 + y**2 + z**2 <= radius**2
397
398 end function f_is_inside_sphere
399
400 !> Check which length of the cylinder is not default. Use that direction as the height and the other two coordinate
401 ! values as the radius check
402 function f_is_inside_cylinder(polar_x, polar_y, height, radius, length) result(is_inside)
403
404
405# 41 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp"
406#if MFC_OpenACC
407# 41 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp"
408!$acc routine seq
409# 41 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp"
410#elif MFC_OpenMP
411# 41 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp"
412
413# 41 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp"
414
415# 41 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp"
416!$omp declare target device_type(any)
417# 41 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp"
418#endif
419# 42 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp"
420
421 real(wp), intent(in) :: polar_x, polar_y, height, radius, length
422 logical :: is_inside
423
424 ! check if the circular component of the cylinder is correct
425 is_inside = polar_x**2 + polar_y**2 <= radius**2
426
427 ! in 3D, also check the length of the cylinder
428 if (num_dims == 3) is_inside = is_inside .and. -0.5_wp*length <= height .and. 0.5_wp*length >= height
429
430 end function f_is_inside_cylinder
431
432 !> Check if the x, y, and possibly z coordinates would be located inside a cuboid with the patch_id's lengths
433 function f_is_inside_cuboid(x, y, z, length) result(is_inside)
434
435
436# 57 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp"
437#if MFC_OpenACC
438# 57 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp"
439!$acc routine seq
440# 57 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp"
441#elif MFC_OpenMP
442# 57 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp"
443
444# 57 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp"
445
446# 57 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp"
447!$omp declare target device_type(any)
448# 57 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp"
449#endif
450# 58 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp"
451
452 real(wp), intent(in) :: x, y, z
453 real(wp), dimension(3), intent(in) :: length
454 logical :: is_inside
455
456 ! check if x and y are inside the rectangle plane at z=0
457 is_inside = -0.5_wp*length(1) <= x .and. 0.5_wp*length(1) >= x .and. -0.5_wp*length(2) <= y .and. 0.5_wp*length(2) >= y
458
459 ! if we are in 3D, this is a cuboid and so we must also check the z axis
460 if (num_dims == 3) is_inside = is_inside .and. -0.5_wp*length(3) <= z .and. 0.5_wp*length(3) >= z
461
462 end function f_is_inside_cuboid
463
464 !> Check if the x, y, are bounded by a NACA airfoil. Check if the z coordinate is inside the left and right edges of the
465 !! airfoil, if set.
466 function f_is_inside_airfoil(x, y, z, length, airfoil_id) result(is_inside)
467
468
469# 75 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp"
470#if MFC_OpenACC
471# 75 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp"
472!$acc routine seq
473# 75 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp"
474#elif MFC_OpenMP
475# 75 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp"
476
477# 75 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp"
478
479# 75 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp"
480!$omp declare target device_type(any)
481# 75 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp"
482#endif
483# 76 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp"
484
485 real(wp), intent(in) :: x, y, z, length
486 integer, intent(in) :: airfoil_id
487 logical :: is_inside
488 integer :: k
489 real(wp) :: segment_fraction, surface_height
490 real(wp) :: vertex_1(1:2), vertex_2(1:2)
491
492 is_inside = .false.
493
494 ! check the initial x bounds of the grid cell
495 if (.not. (x >= 0._wp .and. x <= ib_airfoil(airfoil_id)%c)) return
496
497 ! if we are in 3D, we must also check the z axis
498 if (num_dims == 3 .and. (.not. (-0.5_wp*length <= z .and. 0.5_wp*length >= z))) return
499
500 ! find the segment spanning x on the surface bounding this half
501 k = 1
502 if (y >= 0._wp) then
503 do while (ib_airfoil_grids(airfoil_id)%upper(k, 2, 1) < x)
504 k = k + 1
505 end do
506 vertex_1 = ib_airfoil_grids(airfoil_id)%upper(k, 1,:)
507 vertex_2 = ib_airfoil_grids(airfoil_id)%upper(k, 2,:)
508 else
509 do while (ib_airfoil_grids(airfoil_id)%lower(k, 2, 1) < x)
510 k = k + 1
511 end do
512 vertex_1 = ib_airfoil_grids(airfoil_id)%lower(k, 1,:)
513 vertex_2 = ib_airfoil_grids(airfoil_id)%lower(k, 2,:)
514 end if
515
516 ! inside if y is between the chord side and the surface height interpolated along the segment
517 segment_fraction = (x - vertex_1(1))/(vertex_2(1) - vertex_1(1))
518 surface_height = vertex_1(2) + segment_fraction*(vertex_2(2) - vertex_1(2))
519 is_inside = merge(y <= surface_height, y >= surface_height, y >= 0._wp)
520
521 end function f_is_inside_airfoil
522
523 function f_is_inside_ellipse(x, y, length) result(is_inside)
524
525
526# 117 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp"
527#if MFC_OpenACC
528# 117 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp"
529!$acc routine seq
530# 117 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp"
531#elif MFC_OpenMP
532# 117 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp"
533
534# 117 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp"
535
536# 117 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp"
537!$omp declare target device_type(any)
538# 117 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp"
539#endif
540# 118 "/home/runner/work/MFC/MFC/src/common/m_patch_geometries.fpp"
541
542 real(wp), intent(in) :: x, y
543 real(wp), dimension(3), intent(in) :: length
544 logical :: is_inside
545
546 ! Ellipse condition (x/a)^2 + (y/b)^2 <= 1
547 is_inside = (x/(0.5_wp*length(1)))**2 + (y/(0.5_wp*length(2)))**2 <= 1._wp
548
549 end function f_is_inside_ellipse
550
551end module m_patch_geometries
k
integer, intent(in) k
Definition m_phase_change.fpp.f90:1043
m_constants
Compile-time constant parameters: default values, tolerances, and physical constants.
Definition m_constants.fpp.f90:7
m_derived_types
Shared derived types for field data, patch geometry, bubble dynamics, and MPI I/O structures.
Definition m_derived_types.fpp.f90:356
m_global_parameters
Global parameters for the computational domain, fluid properties, and simulation algorithm configurat...
Definition m_global_parameters.fpp.f90:367
m_global_parameters::ib_airfoil_grids
type(ib_airfoil_grid), dimension(num_ib_airfoils_max) ib_airfoil_grids
Per-airfoil computed surface grids.
Definition m_global_parameters.fpp.f90:915
m_helper_basic
Basic floating-point utilities: approximate equality, default detection, and coordinate bounds.
Definition m_helper_basic.fpp.f90:356
m_helper
Utility routines for bubble model setup, coordinate transforms, array sampling, and special functions...
Definition m_helper.fpp.f90:367
m_model
Binary STL file reader and processor for immersed boundary geometry.
Definition m_model.fpp.f90:357
m_patch_geometries
Contains helper functions specific to various patch gemoetries for determining if a grid cell lies in...
Definition m_patch_geometries.fpp.f90:357
m_patch_geometries::f_is_inside_sphere
logical function, public f_is_inside_sphere(x, y, z, radius)
Check if the x, y, and z coordinates would be located inside a sphere with the patch_id's radius.
Definition m_patch_geometries.fpp.f90:375
m_patch_geometries::f_is_inside_cuboid
logical function, public f_is_inside_cuboid(x, y, z, length)
Check if the x, y, and possibly z coordinates would be located inside a cuboid with the patch_id's le...
Definition m_patch_geometries.fpp.f90:434
m_patch_geometries::f_is_inside_cylinder
logical function, public f_is_inside_cylinder(polar_x, polar_y, height, radius, length)
Check which length of the cylinder is not default. Use that direction as the height and the other two...
Definition m_patch_geometries.fpp.f90:403
m_patch_geometries::f_is_inside_ellipse
logical function, public f_is_inside_ellipse(x, y, length)
Definition m_patch_geometries.fpp.f90:524
m_patch_geometries::f_is_inside_airfoil
logical function, public f_is_inside_airfoil(x, y, z, length, airfoil_id)
Check if the x, y, are bounded by a NACA airfoil. Check if the z coordinate is inside the left and ri...
Definition m_patch_geometries.fpp.f90:467
m_variables_conversion
Conservative-to-primitive variable conversion, mixture property evaluation, and pressure computation.
Definition m_variables_conversion.fpp.f90:367